How Can We Help?
You are here:
< Back

The INTA-300, also known as the "Flamenco", was a two-stage Spanish sounding rocket. It consisted of a launch stage from the type Heron and an upper stage of the type Snipe.

Based on a Bristol Aerojet's INTA-255 rocket, the INTA-300 is capable of reaching altitudes of 300 km (186 mi) alone and to 50 km (31 mi) with its maximum payload weight,[1] having a thrust of 138.00 kN.

The intent of the INTA-300 was to be able to lift a payload of 50 kg to 300 km. With the help of the Bristol Aerojet, the Instituto Nacional de Técnica Aeroespacial was able to make a powerful enough prototype in 1981, after three unsuccessful launches. By the time of the fourth model's construction, funding had been cut.[2]

When funds became available again in the 1990s, the fourth model of the INTA-300 was modified into a more efficient model dubbed the INTA-300B, capable of carrying heavier payloads and reaching higher altitude.[3]

Launches

The INTA-300 was launched by INTA six times between 1974 and 1994 from El Arenosillo.[2]

Date Launch Vehicle Mission Type Nation Apogee Notes
October 9, 1974 INTA-300 Test mission Germany 254 km Failed to reach expected altitude
October 21, 1975 INTA-300 Aeronomy / test Germany 240 km Failed to reach expected altitude
June 28, 1978 INTA-300 FAILURE Spain 0 km Failure
February 18, 1981 INTA-300 Aeronomy mission Spain 285 km First completely successful launch
October 21, 1993 INTA-300B FEIROX / FEIROH Aeronomy Spain 154 km
April 16, 1994 INTA-300B O2-INTA300 Aeronomy Spain 156 km

See also

References

  1. ^ "IAA scientific programme committee". Acta Astronautica. 33: ix. July 1994. Bibcode:1994AcAau..33D...9.. doi:10.1016/0094-5765(94)90099-x. ISSN 0094-5765.
  2. ^ a b "INTA-300". www.astronautix.com. Archived from the original on December 27, 2016. Retrieved 2020-05-23.
  3. ^ "INTA-300B". 2016-12-27. Archived from the original on 2016-12-27. Retrieved 2023-10-08.


Categories
Table of Contents