Original file ‎(826 × 852 pixels, file size: 41 KB, MIME type: image/png)

Summary

Description
English: Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. The primary containment is outlined in purple.
  • DW = Drywell
  • WW = Wetwell
  • SF = Spent Fuel Pool
  • light blue with pink dome = Reactor Pressure Vessel
  • purple = Secondary Concrete Shield Wall
Français : Diagramme/coupe d'un réacteur à eau bouillante (REB) typique de type Mark I à enceinte de confinement en béton avec tore d'acier sous-jacent, tel qu'utilisé dans les réacteurs de type REB/1, REB/2, REB/3 et certains REB/4.
Español: Diagrama/corte esquemático de un reactor de agua en ebullición tipico del tipo Mark I con recinto de contención en hormigón con toro subyacente en acero, como los utilizados en los reactores de tipo BWR/1, BWR/2, BWR/3 y algunos BWR/4.
Català: Esquema d'un reactor d'aigua en ebullició (BWR, Boiling water reactor) de tipus Mark I amb contenció de formigó i torus d'acer incloent baixants, com els utilitzats en els models de reactor BWR/1, BWR/2, BWR/3 i alguns BWR/4.
  • DW = Pou sec
  • WW = Pou moll
  • SF = Piscina del combustible gastat
Date
Source Sketched in Paint.net using 826 x 852 canvas inspired by Page 15 (pdf: 40), Containment Integrity Research at Sandia National Laboratories - An Overview, Manuscript completed: March 2006, Published: July 2006, id: NUREG/CR-6906 and SAND2006-2274P [1] - Prepared by Sandia National Laboratories for the U.S. Nuclear Regulatory Commission, Job Code Y6757. The two diagrams on the same page are labeled: Figure 5 Typical BWR Mark I Concrete Containment with Steel Torus.
Author User:84user
Other versions

  • original diagram from page 15 of the source

  • sketch without downcomers
Converted to SVG.svg This technology image could be recreated using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name.svg}}.

Licensing

Public domain This work has been released into the public domain by its author, 84user. This applies worldwide.
In some countries this may not be legally possible; if so:
84user grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:54, 4 April 2011Thumbnail for version as of 12:54, 4 April 2011826 × 852 (41 KB)84user (talk | contribs)== {{int:filedesc}} == {{Information |Description = {{en|1=Rough sketch of a typical Boiling water reactor (BWR) Mark I Concrete Containment with Steel Torus including downcomers, as used in the BWR/1, BWR/2, BWR/3 and some BWR/4 model reactors. The pr
  • You cannot overwrite this file.