Hosta

LGA	Location	km	mi	Destinations	Notes

1.000 mi = 1.609 km; 1.000 km = 0.621 mi

Template documentation[view] [edit] [history] [purge]

This is a template for generating an intersection or exit for a Western Australia road article. It is a member of the {{Jctint}} suite of templates.

General usage

This is the basic syntax you need to get a complete intersection table. Just copy and paste the code below:

{{AUSinttop}}
{{AUS-WAint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

...and fill in the variables! For more entries, use this:

{{AUS-WAint
|LGA=
|LGAspan=
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Within a single LGA

If a road is entirely within a single local government area, you may omit the LGA column by using the following code:

{{AUSinttop|noLGA=yes}}
{{AUS-WAint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}
{{Jctbtm}}

Just copy and paste the above code, and fill in the variables! Also note that the table should be preceded by line explaining the omitted column, such as:

The entire freeway is in the [[City of Mitcham]].

For more entries, use this:

{{AUS-WAint
|location=
|lspan=
|type=
|km=
|road=
|notes=
}}

Parameters

For the above parameters, here's what you should fill in:

LGA: The name of the local government area in which the intersection is located. Full wiki markup is required, for example |LGA=[[City of Mitcham|Mitcham]]. Parameters such as LGAC can be used instead to avoid using full wiki markup (see below)
LGAspan: number of rows the LGA spans. If value=1, omit this parameter. If set, LGA (or LGAC etc.) should be omitted from the other rows it spans.
location: the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, Western Australia, so if the intersection is in multiple suburbs, you must use location_special (see below).
lspan: number of rows the location spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans
type: use to specify a shading for that intersection's row. The permitted types are:
- closed: for highway intersections or interchanges that are now closed to traffic
- mplex or concur: for a route multiplexing terminus or concurrencies.
- trans: for a route transition – from one route number to either another route number, or a section without a route number, along a named road
- unbuilt: for unbuilt roadway intersections/interchanges.
- incomplete: for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.)
- hov for interchanges that are only for High occupancy vehicle lanes
- toll or etc for an interchange where tolls or electronic tolls are collected
- Note: If the type parameter is used, the table must include a colour key at the bottom of the table. Use the |keys= parameter in {{jctbtm}} to generate a compliant legend.
km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres (see below)
road: road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations>
- Generate route shields using {{AUshield}}
- If there are multiple roads (i.e. intersecting road changes name at this intersection), use a slash (/) to separate roads
- Generate an ndash (–) and wikilinked destinations using {{WAcity}}
- If destinations are to be entered manually, an ndash can be generated by the HTML character code –
notes: any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.

Additional Parameters

In addition to those in the basic syntax, the following parameters may be used:

LGA_note: a note that appears in small text below the LGA
location_special: (replaces location) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup. {{SAcity}}, {{VICcity}} etc. are a useful shorthand.
km2: use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route.
uspan: number of rows the units spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.
rcspan: number of columns the road cell spans-if value=1, omit this parameter. Set |rcspan=2 to generate a left aligned cell that spans both the destination and notes column. Do not use for features such as a rivers and bridges - see place below. Important: if using this parameter, set |notes=none to avoid the notes cell spilling over the edge of the table.
nspan: number of rows the notes spans—if value=1, omit this parameter. If set, notes should be omitted from the other rows it spans.
place or bridge or tunnel: a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.
pspan or bspan or tspan: number of rows the above multicolumn cell spans-if value=1, omit this parameter.
Parameters that replace LGA: The parameters in the table below allow you to enter the LGA name as plain text, and the template will generate the necessary piped link. For example, |LGAC=Mitcham will generate Mitcham , which links to the Wikipedia article City of Mitcham

Parameter	Type of LGA (name of article on Wikipedia)
LGAC	"City of <name>"
LGA-C	"<name> City"
LGARC	"Rural City of <name>"
LGA-Co	"<name> Council"
LGADC	"District Council of <name>"
LGA-DC	"<name> District Council"
LGAM	"Municipality of <name>"
LGA-M	"<name> Municipality"
LGA-R	"<name> Region"
LGAS	"Shire of <name>"
LGA-S	"<name> Shire"
LGAAS	"Aboriginal Shire of <name>"
LGAT	"Town of <name>"

Any parameter which is empty can be omitted.

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:AUS-WAint in articles based on its TemplateData.

TemplateData for AUS-WAint

A template for making intersection tables.

Template parameters[]
Parameter		Description	Type	Status
Exit number columns	`1`	For an exit number column, set to "exit". For exit number and old exit number columns, set to "old"	Unknown	optional
State-cell span	`sspan`	Number of rows that the state cell spans, for interstate routes. For routes within a single state/territory, do not use this parameter	Unknown	optional
LGA-cell span	`LGAspan`	Number of rows the LGA cell spans. If value=1, omit this parameter. If set, LGA (or LGAC etc) parameters should be omitted from the other rows it spans. Default	Number	optional
Local government area	`LGA`	The name of the local government area in which the intersection is located. Full wiki markup is required, for example: [[City of Mitcham\|Mitcham]]	String	required
Local government area - City of ____	`LGAC`	Name of the local government area, when the name is of the form "City of NAME"	Unknown	optional
Local government area - ____ City	`LGA-C`	Name of the local government area, when the name is of the form "NAME City"	Unknown	optional
Local government area - Rural City of ____	`LGARC`	Name of the local government area, when the name is of the form "Rural City of NAME"	Unknown	optional
Local government area - ____ Council	`LGA-Co`	Name of the local government area, when the name is of the form "NAME Council"	Unknown	optional
Local government area - District Council of ____	`LGADC`	Name of the local government area, when the name is of the form "District Council of NAME"	Unknown	optional
Local government area - ____ District Council	`LGA-DC`	Name of the local government area, when the name is of the form "NAME District Council"	Unknown	optional
Local government area - Municipality of ____	`LGAM`	Name of the local government area, when the name is of the form "Municipality of NAME"	Unknown	optional
Local government area - ____ Municipality	`LGA-M`	Name of the local government area, when the name is of the form "NAME Municipality"	Unknown	optional
Local government area - ____ Region	`LGA-R`	Name of the local government area, when the name is of the form "NAME Region"	Unknown	optional
Local government area - Shire of ____	`LGAS`	Name of the local government area, when the name is of the form "Shire of NAME"	Unknown	optional
Local government area - ____ Shire	`LGA-S`	Name of the local government area, when the name is of the form "NAME Shire"	Unknown	optional
Local government area - Aboriginal Shire of ____	`LGAAS`	Name of the local government area, when the name is of the form "Aboriginal Shire of NAME"	Unknown	optional
Local government area - Town of ____	`LGAT`	Name of the local government area, when the name is of the form "Town of NAME"	Unknown	optional
LGA_note	`LGA_note`	A note that appears in small text below the LGA	Unknown	optional
location	`location`	the suburb the intersection is in. The text entered here will be wikilinked to <text entered>, <state>, so if the intersection is in multiple suburbs, you must use the "location_special" parameter	String	suggested
location_special	`location_special`	(replaces "location" parameter) the location where the junction is located - use for custom entries only, such as when an intersection is in multiple suburbs. Requires full wiki markup.	Unknown	optional
lspan	`lspan`	number of rows the location cell spans—if value=1, omit this parameter. If set, location (or location_special) should be omitted from the other rows it spans	String	optional
lcspan	`lcspan`	number of columns the location cell spans—if value=1, omit this parameter. If set, LGA and/or state cells should be omitted from this rows	Unknown	optional
lcalign	`lcalign`	Alignment of the location cell, if "lcspan" parameter is used. Can be set to "left", "right", or "center"	Unknown	optional
type	`type`	use to specify a shading for the intersection's row. The permitted types are: "closed" for highway intersections or interchanges that are now closed to traffic; "concur" for a route concurrency terminus; "trans" for a route transition – from one route number to either another route number, or a section without a route number, along a named road; "unbuilt" for unbuilt roadway intersections/interchanges; "incomplete" for incomplete intersections/interchanges where all movements are not supported (Northbound exit and southbound entrance, etc.); "hov" for interchanges that are only for High occupancy vehicle lanes; "toll" or "etc" for an interchange where tolls or electronic tolls are collected	Unknown	optional
unit	`unit`	no description	Unknown	optional
km	`km`	km: the distance, in kilometres, of the intersection from the start of the road. Only enter numerical values, as these will be used to automatically generate a Miles column. Use km2 if the location is in a range of kilometres	Number	suggested
km2	`km2`	use as the second measurement (km being the first) if there are intersections with a road spread out between two points along the article route	Number	optional
units-cells span	`uspan`	number of rows the units cells spans—if value=1, omit this parameter. If set, km and km2 should be omitted from the other rows it spans.	Unknown	optional
old	`old`	Old exit number	Unknown	optional
ospan	`ospan`	number of rows the old exit number spans—if value=1, omit this parameter. If set, "old" parameter should be omitted from the other rows it spans	Unknown	optional
exit	`exit`	Exit number	Unknown	optional
espan	`espan`	number of rows the exit number spans—if value=1, omit this parameter. If set, "exit" parameter should be omitted from the other rows it spans	Unknown	optional
road	`road`	road that the article route intersects at this junction. This should be formatted as follows:<route shield/s> <wikilinked Road Name> <ndash> <wikilinked destinations> ; Generate route shields using {{AUshield}; If there are multiple roads (ie intersecting road changes name at this intersection), use a slash (/) to separate roads; Generate an ndash (–) and wikilinked destinations using {{ACTcity}}, {{NSWcity}}, {{VICcity}} etc; If destinations are to be entered manually, an ndash can be generated by the HTML character code –	String	required
rspan	`rspan`	number of rows the road cell spans—if value=1, omit this parameter	Unknown	optional
rcspan	`rcspan`	number of columns the road cell spans—if value=1, omit this parameter. if using this parameter, set the "notes" parameter to "none" to avoid the notes cell spilling over the edge of the table.	Unknown	optional
notes	`notes`	any notes regarding that junction. This must include an explanation for any usage of the type-generated shading.	Unknown	suggested
nspan	`nspan`	number of rows the notes spans—if value=1, omit this parameter. If set, the "notes" parameter should be omitted from the other rows it spans.	Unknown	optional
place	`place` `bridge` `tunnel`	a feature, such as a bridge or tunnel. This will appear in a multicolumn cell (centre aligned) that spans the destinations and notes columns. Full wiki markup is required for links, otherwise the result will be plain text.	Unknown	optional
pspan	`pspan` `bspan` `tspan`	number of rows the place/bridge/tunnel multicolumn cell spans—if value=1, omit this parameter.	Unknown	optional